18 Years Factory Cmc For Wall Putty - Massive Selection for Cellulose Producer Hpmc Hpmc For Wall Putty,Mortar,Plaster,Gypsum,Skim Coat In – Kima
18 Years Factory Cmc For Wall Putty - Massive Selection for Cellulose Producer Hpmc Hpmc For Wall Putty,Mortar,Plaster,Gypsum,Skim Coat In – Kima Detail:
Our solutions are widely identified and trusted by people and might fulfill continuously transforming economic and social demands for Massive Selection for Cellulose Producer Hpmc Hpmc For Wall Putty,Mortar,Plaster,Gypsum,Skim Coat In, Striving hard to attain continual accomplishment determined by top quality, trustworthiness, integrity, and complete understanding of marketplace dynamics.
Our solutions are widely identified and trusted by people and might fulfill continuously transforming economic and social demands for Cellulose Hpmc, Customer satisfaction is our goal. We are looking forward to cooperating with you and providing our best services to suit your needs. We warmly welcome you to contact us and make sure you feel free to contact us. Browse our online showroom to see what we can do for you. And then E-mail us your specs or inquiries today.
CAS:9004-65-3
Hydroxypropyl MethylCellulose (HPMC) are widely used in construction, pharmaceutical,food, cosmetic, detergent, paints, as thickener, emulsifier, film-former, binder, dispersing agent, protective colloids.We can provide the regular grade HPMC, we also can provide modified HPMC according to customer requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.
| Appearance | White or off-white powder |
| Methoxy ( % ) | 19.0~ 24.0 |
| Hydroxypropoxy ( % ) | 4.0 ~ 12.0 |
| pH | 5.0~ 7.5 |
| Moisture ( % ) | ≤ 5.0 |
| Residue on ignition ( % ) | ≤ 5.0 |
| Gelling temperature ( ℃ ) | 70~ 90 |
| Particle size | min.99% pass through 100 mesh |
| Typical grade | Viscosity(NDJ, mPa.s, 2%) | Viscosity(Brookfield, mPa.s, 2%) |
| HPMC MP400 | 320-480 | 320-480 |
| HPMC MP60M | 48000-72000 | 24000-36000 |
| HPMC MP100M | 80000-120000 | 40000-55000 |
| HPMC MP150M | 120000-180000 | 55000-65000 |
| HPMC MP200M | 160000-240000 | Min70000 |
| HPMC MP60MS | 48000-72000 | 24000-36000 |
| HPMC MP100MS | 80000-120000 | 40000-55000 |
| HPMC MP150MS | 120000-180000 | 55000-65000 |
| HPMC MP200MS | 160000-240000 | Min70000 |
Typical Applications of HPMC:
Tile Adhesive
●Good water retention: prolonged opening time will make tiling more efficient.
●Improved adhesion and sliding resistance: especially for heavy tiles.
●Better workability: lubricity and plasticity of plaster is ensured, mortar can be applied easier and quicker.
Cement Plaster / Dry mix mortar
●Easy dry mix formula due to cold water solubility: lump formation can be easily avoided, ideal for heavy tiles.
●Good water retention: prevention of fluid loss to the substrates, the appropriate water content is kept in mixture which guarantees longer concreting time.
●Increased water demand: increased open time, expanded spry area and more economical formulation.
●Easier spreading and improved sagging resistance due to improved consistency.
Wall putty
●Water retention: maximized water content in slurry.
●Anti-sagging: when spreading a thicker coat corrugation can be avoided.
●Increased mortar yield: depending on the weight of the dry mixture and appropriate formulation ,HPMC can increase the mortar volume.
Exterior Insulation and Finish System ( EIFS )
●Improved adhesion.
●Good wetting ability for EPS board and substrate.
●Reduced air entrancement and water uptake.
Self-leveling
●Protection from water exudation and material sedimentation.
●No effect on slurry fluidity with low viscosity
HPMC, while its water retention characteristics improve the finish performance on the surface.
Crack Filler
●Better workability: proper thickness and plasticity.
●Water retention ensures prolonged work time.
●Sag resistance: improved mortar bonding ability.
Pharmaceutical excipient and food application：
| Usage | Product grade | Dosage |
| Bulk Laxative | 75K4000,75K100000 | 3-30% |
| Creams, Gels | 60E4000,65F4000,75F4000 | 1-5% |
| Ophthalmic Preparation | 60E4000 | 01.-0.5% |
| Eye drops preparations | 60E4000, 65F4000, 75K4000 | 0.1-0.5% |
| Suspending agent | 60E4000, 75K4000 | 1-2% |
| Antacids | 60E4000, 75K4000 | 1-2% |
| Tablets binder | 60E5, 60E15 | 0.5-5% |
| Convention Wet Granulation | 60E5, 60E15 | 2-6% |
| Tablet coatings | 60E5, 60E15 | 0.5-5% |
| Controlled Release Matrix | 75K100000,75K15000 | 20-55% |
Packaging:
HPMC Product is packed in three layer paper bag with inner polyethylene bag reinforced , net weight is 25kg per bag.
Storage:
Keep it in cool dry warehouse,away from moisture, sun,fire,rain.
Product detail pictures:
Related Product Guide:
Wall Putty powder for exterior formulation
Cement base plasters formulation
We emphasize advancement and introduce new products and solutions into the market each year for 18 Years Factory Cmc For Wall Putty - Massive Selection for Cellulose Producer Hpmc Hpmc For Wall Putty,Mortar,Plaster,Gypsum,Skim Coat In – Kima, The product will supply to all over the world, such as: Norwegian , Panama , Jordan , We hope we can establish long-term cooperation with all of the customers, and hope we can improve competitiveness and achieve the win-win situation together with the customers. We sincerely welcome the customers from all over the world to contact us for anything you need to have!Welcome all customers both at home and abroad to visit our factory. We hope to have win-win business relationships with you, and create a better tomorrow.
By Alexander
from Hungary
- 2016.09.09 10:18
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Bess
from Argentina
- 2016.03.28 12:22
